Programmable RGBW LED Controller

1. RF remote control 2. Colour wheel touch sensor. 3. Multi channels work separtly 4. Instant access to colours and patter

Product Specification:

SR-2818 RGBW remote controller is full touch remote controller which has 8 different zones. It can get Red/ Green/ Blue/ White color directly. The remote controller can save up to 8 colors or 8 modes into corresponding buttons (1-8 buttons) for each zone. You can choose any color through color wheel. There is a USB port to charge internal battery.

 Sender: (SR-2818)

Operation voltage: 4.5VDC

Operation frequency: 434MHZ / 868MHZ

Battery: Lithium battery.

  

  Receiver: (SR-1009FA/ SR-1009F3/ SR-1009F7))

Input voltage: 12-36VDC

Output voltage: 12-36VDC

SR-1009FA: 4 channels x 5A, 34channels x (60-180W)

SR-1009F3: 4 channels x 350mA, 4 channels x (4.2-12.6W)

SR-1006F7: 4 channels x 700mA, 4 channels x (8.4-25.2W).

Note: SR-2818 can also control WIFI receiver (SR-1009FAWi/ SR-1009F3Wi/ SR-1009F7Wi). When WIFI receivers are not controlled by software, then you can use SR-2818 remote. The operation will be the same.

Reg.1). 1009FAWI could control by IPHONE software or SR-2818. No need 2818 WITR.2). 1009FA works with 2818 like 2806 works with 1003RC. 3). 1009FA+2818WITR=1009FAwi.4). One 2818WITR could connect countless 1009FA, so on some point, this means save cost.